HI Everyone,

Some times some things dont seem straight forward. Some things can be so obvious that they are over looked. Simplicity is bliss. Tom Bearden has pointed out many times in videos and text that the motional E-Field is where the power can be taken. Directly from the Dipole, the Dipole is the Engine that already converts the Sub Atomic particles to a Charge. It is important to note, there is not one shred of evidence of MAGNET CONDITIONING (The Flux of the Magnet in motion before the VTA was started) in Floyd Sweet's VTA or SQM at all. No data, Not one single piece of evidence anywhere. The Video with Tom John and Floyd is the only data on this Conditioning and this video is not conclusive. It shows no Flux Movement at all and Floyd says at the end "Put the coils in and go". Flux movement of the Magnets is only supported with evidence after the VTA/SQM was Started.

Daniel McFarland-Cook:

Click Here to download the Patent. Daniel McFarland-Cook mentions using magnets in his device but does not specifically mention how or where to put them. It is obvious with some common sense that some kind of environmental input to the coils is occuring. There must have been some strength to the coils magnetic field as Daniel mentions of using the force to drive a wheel or motor of some kind.

The Project Gutenberg EBook of Cyclopedia of Telephony & Telegraphy Vol. 1
by Kempster Miller, George Patterson, Charles Thom, Robert Millikan, Samuel McMeen:
 

Elemental Magneto-Generator:

Very similar to John Bedini's G-Field Generator and with coil construction in lines with what we are studding. This is a great illustration. There is a good possibility the above design was intended to rotate the magnet via the shaft and pass the poles of the coils like in the conventional generator design. The shaft could also have been used to move the magnet in closer or out from the coils like in the Hendershot design. Reading the text it is not clear. Even so it is an indication of concept. Certainly the magnet if spinning at any speed would be shaky if some real balancing were not done.

Closed-Circuit Impedance Coil:

Good reference material worth saving this document. Ref: http://www.gutenberg.org/files/15617/15617-h/15617-h.htm

Lester Hendershot:

It would be very nice if the above was a bit more legible. Maybe someone can email me a better copy of the above document. Lester Hendershot used a piece of wire to make connections to parts of his circuit to start the circuit in oscillation. Once started it furnished its own energy and powered around 300 watts of load. Click Here to see a picture of John Bedini's Hendershot Replication. This device is about the best method to see its action for this type of circuit.

Edward Leedskalnin:

The Perpetual Motion Holder is another device I would put into this category. Once the E-Field is set into motion or charged the Core the magnetic field inside the Magnetic Material is circulating indefinitely. Where there is a Magnetic field there is also an E-Field. Most Scientists have to disagree with this because it is in their POSTULATE to agree that this cannot be done even though their own experiments show the very same thing. In a Super Conductor the Universities can do the very same thing. They set a charge into motion and it will move around indefinitely also.

Click Here to see my experiments.

Floyd Sweet:

Floyd Sweet himself in an early letter made the statement "A static version of the Space Flux Coupled Alternator is on the drawing board, A working prototype, A 10KW 3 240v, Machine, Excited by low power oscillatory means, its expected isolated feed-back techniques will provide - Close loop source of low level oscillator power thus eliminating a 100% duty cycle." Floyd also made the statement "The Architectural configuration of the windings and their relationship to the magnets will be best understood by observing the construction of a prototype." So statements made by Walter Rosenthal and Floyd match up. A need to start the VTA or SQM is needed by a small input. This is proof that the Magnetic Flux of the Magnet could not have been already in motion and is ONLY set into motion when the SQM or VTA is started. So pre Conditioning of the Magnets are false and no Magnetic flux could have been in motion.

I am sure that there are many other devices invented by inventors that have the same thing in common. If you did not spot the similarity it is the coils/Buzzer in the Lester Hendershot Device or the Wiring hook up in the Daniel McFarland-Cook Device and the core wiring schematic setup of Floyd Sweets setup. This component is utilising the E-Field in the right configuration and oscillates using its own feed back to aid its own operation. Lester Hendershot uses the Iron core to localise the H-Field. Tom Bearden uses the same method in the MEG. Localising the H-Field and he then switches small coils to then oscillate the E-Field. This is a device that needs some thought and it just might work if you approach it right. Tom Bearden has proved this beyond a doubt. It is possible to achieve a result with out expensive materials although Toms MEG is dependent on this affect not everyone else has needed it.

Well more coming soon as always.

_____________________
To reach new horizons...