SQM Replication Project Update 14-05-05.

This is the first ever PUBLIC replication attempt of the SQM Conditioning process that is in the SQM video with Mr Sweet and Mr Bearden. Although not yet successful some great results did come out of the attempt. The new magnets did give different results compared to the last magnets that I broke which is very interesting. I hope very soon to have a small output even if it is not more than the input.

Here you can see the pulse to the conditioning coil. It is an ac pulse which is a result of the RxC time constant. The Resistance times the Capacitance is the time constant. In this case the Capacitor is 1500 UF and the Resistance of the Conditioning coil is 10.7 Ohms. So this Discharge is 16.05 mS. This is about 62.3 Hz. The Math is simply 1000/16.05=62.3 Hz. The best page on the net to work this out is http://www.cvs1.uklinux.net/cgi-bin/calculators/time_const.cgi. The page for the magnet supplier I am using is http://www.magnet.au.com/.

This picture didn't really come out as good as I would have liked but nearly shows the zero crossing of the 60Hz pulse. I will get a better one and replace this one.

These are some documents I have been sent by Robert Michaels, about magnetics. This is old school physics that is very hard to find these days. Thanks Robert.