Well, everybody will be pleased to
see this update. I have been out of
action for a while now trying to get
Isotropic Barium Ferrite Magnets,
the acquisition of these magnets
have been a very slow process. The
reason is not due to the new
supplier but the payment I have made
and unfortunately the fact that
everything that could have held the
acquisition up, has, held the
project up. I must apologise to
everyone that is following the SQM
Replication project. Full payment
has now properly been made and the
only hold up is shipping.
ISOTROPIC FERRITE MAGNETS.
Composition of the
magnets ordered:
Fe2O3
and Ba powder.
The magnets will be supplied as
blanks, unmagnetised, and I will be
magnetising them one at a time when
they arrive.
I suppose with any project there are
delays but this is very frustrating
for myself and others closely
following the project. I have had
lots of emails asking me how things
are going and when the magnets will
arrive. I have done some very basic
experiments while we all have been
waiting. One I thought was
interesting. I used a length of
BiFilar wire and turned it onto a
coil and tied together the ends
after turning it on. The two ends
that I started with I put some
pulsed frequencies through it. In
effect this coil had a charge going
up the coil in one direction and
coming back in the other through
these wires that are the same
length. The coil to my surprise, did
have a strong magnetic field with
it. I expected to see some
cancellation to field strengths due
to the wire and charge coming back
on it self. This makes me think that
we have so far to go in fully
understanding magnetisium.
The magnetic field is different from
Induction and the magnetic field is
not related to Induction in this
case, because there should be no
Induction in this coil, and this in
itself is important in understanding
the SQM. I suppose it could be said
Induction is a spin off of a
Magnetic Field in a specific coil.
The Magnetic Field is extremely
complex and it may be another 100
years before we may understand it
fully. What if, like Induction is a
spin off of a specific coil and a
Magnetic field, there is another
spin off that we may not yet be
aware off with another type of
specific coil and a Magnetic Field?
Thus giving us Negative Energy. I
think the magnetic field consists of
many forces, some we know about and
some we don't yet know about,
gravity could very well have a lot
to do with the magnetic field.
On a different approach, if a coil
was set up in such a way to be able
to collect a magnetic field or block
the collection of a magnetic field,
this would also give us a way to
collect energy in a solid state
device. How would this be done? You
could say the coil could be made to
be an Inductor and then not be made
to be an Inductor. Switching
techniques could be employed to do
this but would be very tricky to
get the circuit to work without
shorting it altogether.
Either way Mr Floyd "Sparky" Sweet
was a brilliant man whose brilliant
mind will not easily be replaced
with another, but his work hopefully
can be reproduced with hard work and
time to do it.
