Floyd Sweets SQM Replication Project.

Hyiq.org has now started an on going project, dedicated to the replication of Floyd Sweets SQM.

Started 19-02-05 .

Read about the theory behind the Vacuum Triode Amplifier prior to starting the SQM Replication project. Click Here.

Update 19-02-05.

This experiment is an attempt to replicate the conditioning process in the Tom Bearden Video. This is to verify the validity of the explanations of the conditioning procedure from the information contained in the video. 

The Bearden/Sweet video consisted of:

Two coils, One large conditioning coil seen in the picture on the right,  and one smaller coil that is inside the larger coil that sits at the bottom (no# 15 gauge 4 Ohms). The smaller coil that sits at the bottom of the larger coil is powered by a wave tech oscillator  through a 100 watt audio amplifier. An SCR that is triggered by a Variac that powers the Larger conditioning coil with a 1600uf DC Capacitor (RC Time constant is triggering the capacitor with the variac. (T = R x C)( T= 60 Hz). There is a rectifier that seems to be used to change from AC current to DC current. There does not seem to be any current smoothing circuitry.

T = R x C

1/60 of a second = 16.6666667 milliseconds (60 Hz)

Capacitance = 1600 uf

Resistance = 1.4166  Ohms

General conditioning procedure in the video:

The procedure is as follows. The magnet is placed on top of the conditioning coil and bought into resonance by the small coil at the bottom of the large coil. This is done by tuning the Wave Tech oscillator down to between 8 Hz and 13 Hz. Then the 60 Hz is bought up to full power to the Conditioning coil. The same is done with the second magnet. The ends are marked and kept in line with the earths magnetic field. The magnets are then placed together on the holder (Aluminum rectangular tube with two inches gap to keep the magnets apart ) in attraction mode with the ends in the same direction when they were marked. The magnets are then placed in side the large conditioning coil at right angles to the magnetic field and again in line with the earths magnetic field. The small resonant coil is still at the approximate 13Hz resonance and again the conditioning coil is bought up to full power at 60 Hz. In a nut shell that's it.  

Click Here for more information.

Experiments have started.

The smaller coil on the inside of the big coil is not giving off enough Magnetic field to get the magnet on top of the large coil in resonance. My magnets are slightly thicker and the Magnets field strength is too strong to let the resonant coil have an effect. The current size of the wire is 1.5 mm and it might be to big for the Amplifier to give it the correct wave form efficiently. A new roll of no# 15 gauge wire will be purchased this week and wound on to the spool. The Impendence is a bit low also. 3.2 Ohms and Floyd mentions in the video that it is supposed to be 4 Ohms. The large coil is pulsing nicely. I currently have a step down transformer with an output at 120 Volts 60 Hz  pulsing into the Large coil. The wave form is not yet what I am wanting to achieve. My basic circuit needs some improvements. The size of the wire on the large coil is currently 1.5mm and measures 1 Ohm. I am currently thinking this coil might need to be Bifilar instead of just the single filer coil I currently have. I am currently testing field strength versus wire size and impedance.

More work will be done tomorrow and Pictures will be posted.

Click Here for more information.

Today I built several capacitor banks and tested further the coil discharge with the (R x C = T) RC Time constant. I am having problems getting the waveform correct to the large conditioning coil. I will have to sort further help with the circuit. It may be the capacitors or even the SCR not switching properly. More testing to come on this small problem soon. I will be getting a variac this week also to regulate voltage better to the input.

Click Here for more information.

This morning I spoke to Mr Walt Rosenthal. Mr Rosenthal helped Floyd with the SQM by building circuits and helping out when Floyd needed it. I asked a few questions about the SQM and the conditioning of the magnets. Mr Rosenthal will, from time to time, check in on the project and will offer advice about the progress and offer insight to the project. The below is the email that Mr Rosenthal and I exchanged.

Dear Chris:

The pulse to the conditioning coil was the single discharge of a capacitor affected by using a large SCR that was triggered at the zero crossing of the sine wave being supplied to the output coils placed between the magnets.

The output coils were bifilar wound.

Walt

I finished the winding of the resonant coil today also. The weight of the resonant coil is 5.4 Kg it is 1.4 gauge enamelled wire with a resistance of 4.1 ohms. Winding this sized wire by hand and when it is this sort of weight was under estimated in time and blisters on my hands.

Click the pictures for more information.

Today I attempted to get resonance in the magnets at the top of the Conditioning coil. Resonance can easily be achieved on top of the resonant coil but the magnetic field strength of the resonant coil is not strong enough to bring the magnet into resonance at the top of the conditioning coil. More power will be needed to get resonance.

We have our first video update today also. Now experiments are starting to get further into the swing more information will be provided in Video update format.

Video Update High Res. 7.9mb

Recommend to use Windows Media Player 10.

Today I purchased a new Audio generator after suspecting a frequency range limitation with the Troneer Audio generator. The Troneer Oscillator starts at 10 Hz. The new Instek Oscillator starts at 0.3 Hz. I have got the same resonant frequency range as Mr Floyd "Sparky" Sweet. At roughly 8.5 Hz the magnet goes into resonance. This is fantastic news and is a wake call to myself that nothing is written in stone. I will post a new video update this weekend. Tomorrow at lunch time I will go down to get an Iron core turned up for the centre of the resonant coil. We are slowly getting the same setup as Floyd had in the video. I see a lot of hard work ahead and a time consuming set of procedures that need to be checked and double checked to get this experiment right.  Communications with Mr Walt Rosenthal are giving more of an idea on Floyds thoughts when he was where we are now. Try and Try again until it works. 

Update 03-03-05.

I sent an email to Mr John Bedini this week after reading this text from a forum:

I worked with Floyd Sweet in the early days before Bearden and Walt R came along, I gave him old TV sets to watch the cycloids on for his first machine. I know what I have seen because I wound the coils for his box. Kron sent Sweet to get a masters in mathematics at GE. Sweet was a real electro magnetic engineer, by the book he knew Kron's math backwards and forwards. He threw the book at me a few times. Bearden presented him with the Vacuum Triode analogy and the math for it. I also knew the process of his box, there were no magnetic bubbles, no magic magnets, and no special conditioners that will make the box work, but there was a special process of which Sweet's own son did not know, he was an EE and could not understand how it worked. I know because I was there helping him at night. My old boss gave him the test equipment to use. Walt R built the circuits for Sweet but I don't think Floyd Sweet told him the process. That's why I put the negative resistance papers here. The only problem is the box was unstable under certain conditions, shock, shorts, and other things. He kicked me out when I showed him the monopole and the G- Field charging batteries with no real current. I was to close to making it work every time. I was told later he thought I was going to build his box. I kept that secret and studied negative effects in semiconductor lattice with inductive loads instead only because I was trained in semiconductors at TRW right out of school. I found what I was looking for, and I hope you do too.

Click the pictures for more information.

Today I received a fantastic email from Mr Tom Bearden:

Thank you very much Mr Bearden. You also are one of my hero's.

In the last 8 days I have changed a few things to try to get as close to the video as possible.  Much of my work is guess work and frustration is common with failure. I have had no success with the resonant coil at the bottom of the Conditioning coil. The magnetic field strength is just not enough to bring the magnets into resonance while the magnets are on top of the Conditioning coil. I started work on the 60 Hz oscillations in the Conditioning coil again and at certain power levels the circuit stops and the transistors fuse. After fusing several tens of transistors I sat back and thought about the approach I was taking. May be instead of trying to trigger the Conditioning coil via an Audio Oscillator, it would be better to use the Coil and SCR in an oscillating circuit of their own (SCR Oscillator). This circuit would also solve the problem of the Resonant coils field strength not being sufficient to bring the magnets into resonance at the top of the Conditioning coil because the starting voltage and frequency of the Conditioning coil would be the same as the Resonant coil, exactly like the video. For example the input Voltage of say 40 Volts to the Conditioning coil would give this circuit a frequency of around the 8.5 Hz of the resonating Magnet.

Sitting back now this approach seems so simple. The field strength of the Resonant coil is still in question while the magnets are inside the Conditioning coil. Will the field strength be sufficient to open the molecular structure of atoms inside the domains themselves.

Progress has been made. I got some Alloy tube this week to replace the PVC holder for the magnets. They measure 100mm x 150mm x 50mm and fit exactly to the magnets. I will put some pictures up tomorrow.

With the information I have learned after these experiments I expect to have a full video demonstration of the first attempt at conditioning the magnets in two weeks time. This is as long as everything goes well and I don't blowup anymore hardware.

I have received a lot of very good feed back. Suggestions like the Alloy tube that may have eddy current effects, to Coil structure and Circuit information. Thanks to everyone that is so extremely interested in this project.

Click the pictures for more information.

I have blown another Thyristor and that was the last 700 PE 160 I had. I have purchased some new 1700 PK 160's. These Thyristors are rated at 1700 Amps and 1600 Volts.

Click the pictures for more information.

I thought I had a reasonable knowledge of electronics. In the past few weeks I have learnt a lot about high voltage and discharging into small coils at repetitive rates. I still have a lot to learn. Low voltage electrical experiments are easy but everything changes when the voltage increases. I now have the second Conditioning coil built. The resistance of the coil is 11.1 Ohms, the coil has 800 turns of 0.9 gauge enamelled wire. The Capacitor is still 1500uf . This makes the R x C time (T = R x C) constant calculation 11.1 x 1500 = 16.66 milliseconds (60 Hz). This is the same as the video, the small difference being the capacitor was 1600uf  in the video. I will be using a 1600uf Capacitor as soon as I can get one that is rated with the right voltage.

Not using any names here but I just want to say thank you to a very special person that has helped me a lot. Thanks to the help I have received from this person, it has not only saved me money but it has also saved me time.  The world needs more people like you.  ;o)

Click the pictures for more information.

Today after a few weeks of things not really going to well things fell into place. The Conditioning coils pulse is almost spot on and the resonance in the magnet on top of the conditioning coil is looking to be bought in alignment with the Resonant coil at the bottom of the conditioning. I have included a video update today as well since everything is working quite well.

Click the pictures for more information.

Video Update Low Res. 5.53 MB

Update 02-04-05.

Well after such a good series of tests last weekend this weekend has presented a partly expected problem. The Thyristor is latching. In other words it is staying on when the power is turned up. The thyristor is still doing its job and when it is pulsing it is pulsing nicely but when the power gets turned up it latches and that's not what we want. Back to the drawing board with this circuit and look at an alternative.

I am going to look at the video again and see if there is something in there I am missing. I am looking at another circuit called a SCR Oscillator Circuit. A thought, Triacs trigger on the zero crossing...

Update 11-04-05.

More good news, I have got resonance on top of the big conditioning coil now after purchasing a 15 cell car battery. More power to the amp has increased the field slightly but it is still not as strong as Mr Sweet had it in the video. I am going to put this down to magnet depth and better production of the magnets now with higher field strengths.

I am still close to the first attempt of conditioning the magnets but a few small things I am not yet happy with:

1/ Time to discharge the capacitor is still causing the SCR/Thyristor to latch.

I am still thinking my direction here may not be right. I have briefly tested the SCR oscillator circuit with no success. This is what I need. Capacitor to discharge and to turn off the SCR with back EMF. This could be a single discharge of the capacitor but is more likely to be a discharge in oscillations other wise this does not explain the bulb in the video oscillating in brightness.

2/ Increase if possible the resonance affect at the top of the large coil, the blade is waving or oscillating but is is fairly lightly oscillating.

There is a bit of a delicate balance in this setup for the conditioning. Tuning and adjusting after time will give the desired results here and I hope we get the results with the magnets after this is all done. I am thinking more and more that it will. I found these quite good articles about magnets also there is some mentions of instabilities of the magnets and that's what I think we are going after. Click Here.

Something I am finding interesting is the amount of pages on the net that have been taken down when you search for "Spin wave instability magnon distribution for parallel pumping". Interesting ;o) Lucky I have a few books about this phenomena.

Click the pictures for more information.

Hi Everyone.

Today proved to be a very important day in the SQM Replication project. I added another coil to the conditioning coil to try to get the resonance in the magnets and also used the Resonance coil at the bottom of the Conditioning Coil. This works really well. Another surprise is the pulsing of the Conditioning coil in conjunction with this new coil pulsing is switching the conditioning coil with no latching. I am getting much closer to the desired results.

Hi Everyone,

Something I have noticed today is that the video camera has some interference from the coils pulsing. This is very interesting because this has never happened before now. I wonder if it is a sign. I had to redo the video because the video was jittery. Some of the effects of the waving of the blade (Magnets Resonance) has not come up as well as I would have liked. There is much more of a resonance effect than what is shown in the video.

Magnets resonant frequencies.

I included some small Ideas and pics into the last update also. I was going to hold off but I thought it was relevant. This was the update on the 11-04-05. This is what I was thinking about through the week and I have got to the point now where I am questioning everything.

All in all this week we have achieved a few more goals and next week we will achieve some more. The more I think about this project, and it is on my mind 24/7, I really think this is going to work. It might be to early to make a big call like that but it is a gut feeling. Zero crossing of the pulsing trigger and the possibility of an oven as Mr Bedini said may just be enough to make the SQM work again.

I have been working on a bit of a movie for the SQM replication also. 

More Information coming soon.

Click the pictures for more information.

Video Update Low Res. 5.8mb

Video Update High Res. 28.8mb

Recommend to use Windows Media Player 10.

While some thoughts were going through my head I decided to write them down. I came up with this summary.

Tests on the magnets with the conditioning setup have now started. The setup is very close to the video and I believe the electro magnetic fields are the same as in the video. I am currently having no problems with the pulsing of the Conditioning coils of Resonant coils. I have my clock ticking and will be interested in how long it takes before a result is known. I will hopefully have video posted in the next few days.

Hi Everyone. In tests I have recently done I have broken the magnets. "Not happy Jan" ;O(

Well my clumsy accident was spend in days of anger with myself about trying to get things done quickly and not being careful. I have done some research and on American Antigravity I listened to this Interview: http://www.americanantigravity.com/graphics/interviews/John-Searl.wma

You have to listen to this. Mr John Searle claims to have a oscillating magnetic field in a metal object or a magnet. This is the most important information if it is true in all our existence of scientific history. This is an extremely important discovery that will change our lives for ever.

Hi Everyone, Experiments are still continuing. No results are known yet but I am thinking there is an extra component that is needed. Heat, like Mr Bedini, and Mr Bearden said. I thought an extra component would be needed but just wanted to satisfy myself that the Video it not entirely correct in "The way the conditioning is done".

I will be looking at heat treatment of the magnets to get the Oscillations we are after. Atomic Oscillations are known and we will get this achieved, we must. The reason why this is so extremely important is in the video provided on the right hand side.

We have polluted our Planet for over a hundred years and when we realize we need to stop it will take a thousand years to clean it up. This is not the burden I want to leave to our next generation. We cant have our Children clean up after us. Weather patterns have changed drastically over the last twenty years and if this is not enough of a sign then what is.

Hi Everyone.

Today's Update is big. This is the first video update of the conditioning attempt of the magnets. The attempt is as close to the video as possible, with an explanation as to the procedure from the video, and my procedure. Although I have no output voltage or Current yet, there appears to be a oscillation from the magnets with the scope probes on the magnets. I realize this most likely doesn't mean the magnets themselves are oscillating. The Oscilloscope will produce a sine wave output when the probe is placed on most solid materials on low settings. For example a lump of Alloy will give off a sine wave if the probe is affixed to it or even your hand if you touch it. I need to investigate this further, as I am not over looking anything. One magnet appears to be oscillating more than the other. There are also some Documents I have been sent by some very kind people. The documents are attached in the Update page on the side.

On a skeptic note. It is most probably a coincidence but a military Helicopter, after I shot the Video, came down from the north and did three circles around my general area... then left again. We do get a lot of choppers around here but not normally military. I just had to take a picture and post it also.

The really good thing is that I now have and can increase the discharge voltage to the capacitor at more than 200 Volts with no problems at the desired frequency. Sorry about the size of the Video and res, I have run into some problems with space on my site and want to be careful on the size of the videos I am now Uploading. If you would like to see higher resolution please email me.

I must apologize as the last week was very busy at work and I may sound a bit on the vague side in the video. I hope not too much.

Click the pictures for more information.

Video Update Low Res. 13mb

Recommend to use Windows Media Player 10.

Hi Everyone I have decided to publish the information I was given as it is very important and think a no answer is a yes. If the Author would like it removed please email me. I have removed the name of the Author until I hear from the Author. I have also put a link up for a good java applet to show the E-Field. More experiments are continuing and I will update the SQM page soon.   

I have today received an Email from the magnet supplier saying that BaFe is no longer being used even though the Site still advertises BaFe magnets. Buyer beware...

I have another supplier that is advertising BaFe. Can it only be confirmed by testing the magnets, I suppose.

New Supplier: http://www.magnets.com.cn/in2h.htm

This weekend I thought about what is really needed for the magnets to have their structure changed by the conditioning process. I tried a few things. I heated the magnets to 200 Degrees Celsius (170 Deg Celsius is safer, sometimes the magnets will crack and break if heated too much) and used much higher values of capacitors. 21500uf at 200 Volts was discharged into the Conditioning Coil. Some math is included in this weekends update also which makes some sense of why last weekends Conditioning attempt failed to achieve any results.

Some good information came from this weekends experiments and I think already more information has been learned in the past three months than a whole year of research into the SQM.

More coming soon, Oh I am thinking of trying to get a SQM experimenters video conference started for those interested in the SQM Project. Maybe a once a month thing, if you are interested please email me.

Click the pictures for more information.

This update is just a progress report and some ideas on the SQM and how coils may work inside the SQM.

After several months of thought about my experiments a solid theory has evolved and it is getting exciting to know that this is where everything is sitting in place very well.

The Isotropic Barium Ferrite magnets are now here. Experiments will continue and tomorrow I will post some more information about them. ;O)

Well in all the time I have been experimenting and trying to replicate the SQM I have not yet had so much FUN. I have magnetized one of the Isotropic Magnets I have just received from China. This is fantastic fun to see something so simple make such a big change to a solid block of BaFe. The magnets are exactly what I was after when I ordered them. Easy to magnetize and piece of cake to do what I wanted to do with them. They are a good size and strong enough to be magnetized in all directions easily. Building the Magnetizing circuits and fixtures took some time but was fun also. All in all this weekend was fun and a success.

Posted today is what I think is pretty close to the original conditioning circuit. It ties in to the VTA or SQM conditioning really well. Everything fits nicely with the 19-08-05 update well. I would like someone to run a simulation on this circuit that has a full copy of TopSpice v7 and send me the results back so they can be posted. It is a great application but to expensive.

Send me an email if you can do it:

Magnetising the magnets is still on going at the moment. I am checking the field lines and making sure I can get the magnets as close to professional field patterns as possible. I have only magnetised two of the magnets and will only be working on two until I am confident the field patterns are right.

Hi Everyone, I have looked at a bit of a different path over the past few weeks for the SQM. I have not updated this information to the SQM page because it is along totally different line from the current project and I don't want to throw a spanner in the works. I will be continuing the current path and the path of the original project and updates will be posted on the project soon but I may be starting a different page for what I am doing with the SQM with a few different ways and ideas. I have ordered some high Power IGBT's to control the pulses better. I had a circuit nearly exactly the same as in the video with Mr Sweet but the pulses are not very strong at all.

Magnetising the magnets, I have learnt a lot. It is interesting to note that the way I have done it with coreless magnetising coils that the lower resistance of the coil the better the magnetising (More even field lines and stronger magnetic field). If you need to magnetise magnets use a large wire gauge and try to make the resistance about 1-2 Ohms. This does not saturate the magnets.

I thought I would go one step further from yesterdays update. Reading the literature Mr Bearden and Mr Bedini have said all along that Mr Sweet had changed the "SQM mid stream". What I am looking at now is what did Mr Sweet change from. He was getting 6 watts out according to the documentation on Mr Bearden's site, but the question is how much input was needed for the 6 Watts out? There the SQM must have changed because the 6 Watts very quickly turned into 500 Watts. I am getting some hardware made up so this weekend I will post some more information about what I am trying to do. The old saying "sometimes we need to take a step backward to move forward".

Oh the IGBT's I have ordered are 1200V 600Amp FZ600R12KS4. SCR's are to difficult to control for what we are trying to do so I thought we needed to look at a better switching method to really achieve any results. I am sure the conditioning is still needed but I do think a small output can be achieved with out the conditioning.

Data sheet can be viewed here: http://www.eupec.com/gb/2_PRODUCTS/2_1_ProductRange/pdf/DB_FZ600R12KS4_3_1.PDF

Thanks to Mike Trubridge from Fastron Technologies he really looked after us. You can Email for price info at:    If you email Mike let him know we put you on to him and he will look after you also.

Well the ideas I had were not successful and this is very important in the SQM's progress. This either means the SQM had a secret configuration before the successful reported conditioning of the magnets or the magnets were in oscillation before the reported time. This contradicts all information in the SQM's history which is big in itsself. I mean really Where is the energy coming from? It is not from the magnets as such or the original SQM would have had a configuration that was fairly conventional and a small output would be achieved (Say 6 watts like the original SQM). Simply information is not adding up on this project and some answers are needed. I think a few misleading truths have been told in the history of the SQM which is a shame. AND REALLY WHAT IS THE MOTIONAL E-FIELD???? It is obviously very important or it wouldn't be in the "Nothing is Something" Paper by Mr Sweet.

Hi Everyone. I must say a big thank you to everyone that has sent emails in support of the project. After my last update I did sound a bit frustrated reading back on it so thanks again to everyone. If it was not for you I would have only a small amount of motivation here after this amount of time with no real success. Well this update is to show what I have been doing and the ideas I have had and ideas of those that have emailed me.

This is the turning point of the information contained in the video. A new approach has been taken and more research into magnetic oscillations has been done with a detailed look at the SEG, Mr Searls method of conditioning. This is by far one of the better updates I have posted and many will be happy with the progress made here.

A Theory Update today. This is to clear up the confusion over the "Motional E-Field". I think this is a big step forward to understanding what we need to do. Email me with your ideas...

Hi everyone. It has been a while since my last Update and the problem has been finances. I now have enough for the new capacitors I needed to fully satirize the magnets I needed. Capacitors have been purchased and work continues. I have in my spare time built a neat tool for a bit of fun and as a tool. An Artificial Intelligence Interactive Robot. Built in C# and using the free technology of Dr R Wallace's AIML (http://www.alicebot.org/downloads/programs.html) and Nicholas H. Tollervey (http://www.ntoll.org/projects/aiml/ ) AIMLBot. Nicholas's .dll has enabled my project and both the AIML of Dr Wallace and Nicholas's .dll (slightly modified) come free with AIIR. for only $35 dollars you can purchase this tool and help the SQM project. Click Here.

More coming soon on the SQM Project...   Oh yes, 50% of proceeds go back into the SQM Project so please spread the word. 

Today I have dedicated a much better effort to explaining my last theory Update. It is very interesting to challenge Science and most would say you are crazy to challenge Science. My answer to them is the whole point of Science is to challenge the current theories. A hero of mine, Burt Rutan, said "the point of research is to do something that half the population think is impossible". Besides we really are getting some where and I do believe it wont be long before we have a break through. Thanks to all the support emails again.

Hi Everyone, Dale one of the members of the HYIQ SQM Replication effert has put together an excellent document with references to aid in theory.

Hi Everyone. I have done some simulations using Visimag 3.1 to try to get a better idea of the Fields inside the SQM. I have been looking into the Hooper Moinstein Experiment which gives a brilliant way to show the E-Field does exist from the magnet as we already know.

I have made a few mistakes with Naming conventions and this update s to point this mistake out. I must apologise for my mistake.

Hi Everyone. This is another big update. Much has been done and you will see that by the Pictures in this update. A full circle has been done by steering away from the video with Mr Bearden and Mr Sweet. I am now at the point where I think we have been given all the information but I just have not put it all together correctly. I hope you enjoy this update as a lot of work has gone into it.

I have rebuilt Medusa. A bit of a long time between updates but this is just a bit of an update to what I am trying to achieve at the moment. Work is not yet completed and not results are yet available but I hope to have some more information soon.  I must also apologise to everyone about the site being up and down a few times this week.

This update is more of a wake up call...

This update is old but important documents from E T Whittaker the 1903 document is a bit hard to find and read easily from the internet. The 1904 document is easy but I wanted them both together for reading purposes.

Medusa has taught me a few things in its evolution. I have thought about the device and what I was trying to achieve and it dawned on me, "It is getting too complex". Coming back to basics, I thought well Floyd was a transformer expert so what if he was able to do what he did with a few Transformers?

Today I have reposted data from the net but collated it all into a calendar of events to try to bring together all the good information about the SQM. This is what I have collected after several years of Research and close study I can nearly say all this information is all correct. I hope to have an update very soon with the latest experiments I have done. I am having a very good run with experiments so far and everything is working the way I want it to. I must say I have probably watched the Sweet Bearden video nearly 10,000 times now. ;O) I am sure I know what needs to be done to make the SQM Work again but I just need to set up the Conditioning circuit right.

I have got the Conditioning circuit running with all the right parameters I need to condition the Magnets. I may need to increase the capacitor voltage a bit more to achieve the desired results. A video Update is available today. It is high res and I am sure you will be impressed with this effort.

Some information I want to share has now been well tested and confirmed. How to catch Radiant Energy...

Just a small update today. This is just to let you know I have got the voltage where I want it for the conditioning and explains the Wave I am now using which is so important to be able to achieve the goal of replicating the SQM.

If you are electronically inclined then I strongly encourage you to build this conditioning setup and test it. Working with High Voltage is very dangerous and could be lethal. This is not work that is to be taken lightly. Hyiq.org accepts no responsibly for harm to ones self or damage to equipment. This information on the hardware setup is provided free for public use but is under testing and could change at any time.