Coil configuration.

Conditioning coils are now built and tests on the coils are being done to get them as close to Floyds setup in the video.  The big main coil is 1 Ohm and the inside coil is at 3.2 ohms. The inside needs to be no# 15 wire with an ECR of 4 ohms. The large coil has a diameter of 150 mm.

The two coils sitting apart. The larger coil is the conditioning coil and the smaller coil is the resonant coil. The resonant coil is to used to put the magnets into a resonant state. The magnets sit on the larger conditioning coil to get the resonant frequency.

The next picture shows how the larger conditioning coil goes over the smaller resonant coil.

This picture shows the smaller resonant coil inside the larger coil.